Pronterface setting 200 deg default
Hey all, Just had to reinstall my printer after a laptop meltdown, grrrr, and am having a problem with my pronterface setting the temp of 200 on the hotend regardless of my setting in sli3er. I have...
View ArticleRe: Pronterface setting 200 deg default
I change slicer to Nothing, I delete those inputs and manually change it via pronterface If i do put those inputs in, my temp takes a long time to settle, most of the time it wont even start due to my...
View ArticleRe: Pronterface setting 200 deg default
Thanks for the reply. I have changed the settings in sli3er to zero but it doesn't seem to be reading the settings. The only way I can get a print is to generate the g code in sli3er and save and then...
View ArticleRe: Pronterface setting 200 deg default
Pronterface doesn't care what settings you have, it simply sends the gcode you give it to send. So, you need to get slic3r to generate gcode with the correct temperatures. No idea how you do that,...
View ArticleRe: Pronterface setting 200 deg default
In Slic3r config under the filament setting there are inputs for the first layer and all other layer temperature settings. [manual.slic3r.org]
View ArticleRe: Pronterface setting 200 deg default
I'm also having this problem. I tried changing the settings in slic3r and it still drops the nozzle temp to 200 before it will print. I manually opened the config file and changed the values, but...
View ArticleRe: Pronterface setting 200 deg default
Do you have a command like M109 200 near the beginning of your Gcode ?
View ArticleRe: Pronterface setting 200 deg default
Only command at start of gcode is G28; home all axis. Another reason I think pronterface is not reading sli3er is when I downloaded pronterface, it had a command at the start something like G1 Z5...
View ArticleRe: Pronterface setting 200 deg default
Have you looked in Pronterface Settings?? There are several entries there relating to Slic3r, in particular there is an entry called 'sliceconfig' which points to the profile that your installation of...
View ArticleRe: Pronterface setting 200 deg default
Thanks HarveyC. I found that directory and the settings saved in the ini files are what I have set in pronterface but pronterface is not reading those settings from the console. If I open a file under...
View ArticleRe: Pronterface setting 200 deg default
Another thought... Pronterface stores its settings in a file called .pronsolerc, its a text file without an extension. If there is one in C:\User\{user} it uses that by default, but if this one is not...
View ArticleRe: Pronterface setting 200 deg default
Any solutions to this 200 degree set problem, its my latest stumbling block. At 200 deg my hotend is too slow to extrude and the hobbed bolt shreds the filament. its v. annoying. heat to 230, click...
View ArticleRe: Pronterface setting 200 deg default
Back to the start: Pronterface and Slic3r are two separate programs. Both *can* set the temperature. When you set the temperature of an idle printer, you do it with Pronterface. When you set the...
View ArticleRe: Pronterface setting 200 deg default
:) Thanks, more searching has revealed that slic3r uses a default 200 degree setting. Sorry pronterface for inaccurate accusations! I;ll make sure I do my share of passing info to newbies to help...
View ArticleRe: Pronterface setting 200 deg default
Your print settings go in Slic3r. You can set a first layer temperature and a temperature for the rest of the layers. You can set both the hot end and the heated bed temperatures that way. The...
View ArticleRe: Pronterface setting 200 deg default
QuoteHarveyC Another thought... Pronterface stores its settings in a file called .pronsolerc, its a text file without an extension. If there is one in C:\User\{user} it uses that by default, but if...
View ArticleRe: Pronterface setting 200 deg default
Hi all New here I got here as I was having the same problem with 200 deg as default with slicer and pronterface I also had Repieter installed it also uses slicer but had a newer version of slicer...
View ArticleRe: Pronterface setting 200 deg default
check your firmware settings and maybe if lcd eeprom settings if your printers firmware is sett at 200 or even eeprom(unsure) but you can send 230 but the firmware will restrict it 200
View ArticleRe: Pronterface setting 200 deg default
Hi again all I have installed the lastest slicer into pronterface with no problems so far I unzipped the stable version of slicer and copied the slicer directory an pasteded it to pronterface...
View ArticleRe: Pronterface setting 200 deg default
Under settings, options, user interface tick 2 boxes at the top. Enable Slic3r integration and Update slic3r default presets. Restart pronterface. You will now have a new menu item at the top that...
View ArticleRe: Pronterface setting 200 deg default
Make sure you click the save button under each tab to save your settings before exporting your gcode. (see attached image) Hopefully that will solve the issue. It did for me. Tyson
View Article
